After starting Xopero SVS from USB flash drive displays a window, where there are two options. In order to restore system you have to choose Xopero Backup & Restore.
Next, from available option choose Xopero.
After choose this option displays a window Xopero utils, where you have to choose Configure option.
To properly set up the connection to your account, which was made HDD image backup you must enter the server address, user name and password. If the user has given his own encryption key, you also must enter it.
When logging at to the account in the Xopero Cloud service, enter the following server address:
- https://repo1.xopero.com:443 for the panel: https://cloud.xopero.com/
- https://repo2.xopero.com:443 for the panel: https://cloud2.xopero.com/
- https://repo3.xopero.com:443 for the panel: https://cloud3.xopero.com/
- https://usrepo.xopero.com:443 for the panel: https://uscloud.xopero.com/
- https://asiarepo.xopero.com:443 for the panel: https://asia.xopero.com/
In case of doubts regarding the choice of server address, please contact our technical support (link).
For local solutions, enter the IP address of the device on which the Xopero server module is running (e.g. https://192.168.0.199:45554 or http://192.168.0.199:45558).
If the configuration has been correct it will be confirmed by the message, and displays an additional option Restore, which you select to restore the system.
Next, you need to select the host from which you want to restore the system.
In the next steps select the backup image, version and drive to which you want to restore the system.
Before start the restore displays a message, informing about the possibility of losing data stored on the disk that will be restored system.
After choose Yes option being restoring.
After the end of the operation message is displayed.
If the message will be accepted, the application will return to the first window, where you select Shutdown option.
Then, change the boot sequence order to boot from the disk that has been restored system.