QNAP Appliance

Introduction

The following document will guide you through the installation of Xopero and the process of updating the software on the QNAP device. To install Xopero on QNAP, it has to be remembered that the particular NAS’s processor must be built on x86/x64 architecture and run under the QTS 4.0 (or newer). The list of supported QNAP series is available on our website:http://xopero.com/uk/product-qnap-appliance.html.

How to get Xopero?

You can download Xopero backup installation package directly from our website: http://xopero.com/get-xopero.html

Just provide your email address, check which notification you want to receive from us and click Download button. The download process will start automatically.

Updating Xopero

If the new version of Xopero is available, you will be informed about it in the Xopero Control Panel. There will be also a direct link to the download of the newest Xopero package. Click on it in order to start the download.

The next steps in updating process are the same as in the installation.

Installation

To install or update Xopero, go to your QNAP web panel and open the App Center. Click on Install manually button which is placed in the right, top corner.

In the subsequently displayed dialog window click Browse button and select the package that you had downloaded. Then click Install button and installation process will begin.

The installation process will take approximately 2 minutes. When it is finished you can start to protect your data with Xopero.